Long Neck Ball Nose End Mill For Aluminum HRC55

Bilyalı Uçlu Frezeler

Long Neck Ball Nose End Mill is a special tool for cutting, turning and milling. Due to the special nature of material, conventional tools encounter rapid tool wear, poor cutting results, etc. The Ball Nose End Mill is optimised to solve these problems and improve machining efficiency and product quality.

Ürün Özellikleri:

Optimised cutting edge design:

The Long Neck Ball Nose End Mill features a carefully optimised cutting edge design that reduces cutting resistance, reduces tool wear, extends tool life and improves cutting efficiency.

Wear-resistant material selection:

Selection of high wear-resistant material cemented carbide, to increase the wear resistance of the tool, to ensure that the tool to maintain cutting stability for a long time, to improve machining accuracy.

Effective heat dissipation design:

It is easy to generate a lot of heat when machining, Long Neck Ball Nose End Mill is designed with heat dissipation grooves and heat dissipation fins, which can quickly transfer the heat to prevent the tool from overheating, maintain machining stability and ensure product quality.

Precision Cutting Control:

Enables finer machining and improves the surface quality of products for applications with high demands on precision and appearance.

SGQD-LY

HRC 55

Teklif Talebi

Ürün Detayı

Çelik, Dökme Demir için

Birim

(mm)

D≤12

D>12

-0.015

-0.02

Diameterd D

Radius R

Cutting Length L

Effective Cutting Length L1

Shank D2

Overall Length L2

0.3

0.15

0.6

2/3/4

0.4

0.2

0.8

2/3/4/5/6

0.5

0.25

2/3/4/6/8

0.6

0.3

1.2

2/3/4/6/8

0.7

0.35

1.4

3/4/6/8/10

0.8

0.4

1.6

3/4/6/8/10

0.5

6/8/10/12/20

1.5

0.75

6/8/10/12/20

6/8/10/20

Sipariş Kodu

SGQD-LY-2F-003006020450

SGQD-LY-2F-004008020450

SGQD-LY-2F-00501020450

SGQD-LY-2F-006012020450

SGQD-LY-2F-007014030450

SGQD-LY-2F-008016030450

SGQD-LY-2F-0102060450

SGQD-LY-2F-01503060450

SGQD-LY-2F-0204060450

İş Malzemesi

Iso

İş Parçası Malzemesi

Kesme derinliği (mm)

VC m/min

Allopys(Sis12%) Cast Aluminium Allopy(Si>12%)

Ap≤0.02D Ae≤0.02d

80 70

Rote Speed (Min-1) Feed Velocity (Mm/Min)

Takım Çapı (mm)

0.3

0.4

0.5

0.6

0.7

0.8

0.9

20000 2000

13000 1500

10000 1650

8000 1950

6600 1950

5000 2000

4000 2000

16000 2000

10600 1200

8000 1300

6500 1500

5300 1550

4000 1600

3200 1600

Above table is the standard cutting data for side mlling maching, f for groove cutting, the VC should reach 50%-70% and the fed should reach 40%-60% based on the table.