Square End Mill HRC68

Vierkant-Schaftfräser

ST-KK Serie Variable Helix Square End Mill is a special tool for cutting, turning and milling aluminium. Due to the special nature of aluminium, conventional tools encounter rapid tool wear, poor cutting results, etc. The ST-KK Serie Variable Helix Square End Mill is optimised to solve these problems and improve machining efficiency and product quality.

Produktmerkmale:

Optimised cutting edge design:

The ST-KK Serie Variable Helix Square End Mill features a carefully optimised cutting edge design that reduces cutting resistance, reduces tool wear, extends tool life and improves cutting efficiency.

Wear-resistant material selection:

Selection of high wear-resistant material cemented carbide, to increase the wear resistance of the tool, to ensure that the tool to maintain cutting stability for a long time, to improve machining accuracy.

Square End Design:

Square end design ensures excellent chip evacuation, preventing chip clogging and enhancing machining efficiency. Capable of performing various machining operations, including slot milling, side milling, and contour milling, with wide applicability.

Precision Cutting Control:

Enables finer machining and improves the surface quality of aluminium products for applications with high demands on precision and appearance.

ST-KK

TISIN

HRC 68

Anfrage für ein Angebot

Produkt Detail

For Steel , Cast Iron

Unit

(mm)

D≤12

D>12

-0.015

-0.02

Diameterd D

Cutting Length L

Shank D2

Overall Length L2

1.5

2.5

100

Bestellnummer

ST-KK-3F-01030450

ST-KK-3F-015050450

ST-KK-3F-02060450

ST-KK-3F-025080450

ST-KK-3F-03090450

ST-KK-3F-04120450

ST-KK-3F-05130650

ST-KK-3F-06180650

ST-KK-3F-08200860

ST-KK-3F-10301075

ST-KK-3F-12361275

ST-KK-3F-144014100

ST-KK-3F-164516100

ST-KK-3F-185018100

ST-KK-3F-205020100

Work Material

Iso

Workpiece Material

Depth of cut (mm)

VC m/min

<45HRC Wrought Aluminium Allopys Cast Aluminium Allopy Alloys/CastAluminium

Ap≤1.5D Ae≤0.2d

150 (60-350)

Rote Speed (Min-1) Feed Velocity (Mm/Min)

Tool Diameter (mm)

20000 2000

13000 1500

10000 1650

8000 1950

6600 1950

5000 2000

4000 2000

16000 2000

10600 1200

8000 1300

6500 1500

5300 1550

4000 1600

3200 1600

Above table is the standard cutting data for side mlling maching, f for groove cutting, the VC should reach 50%-70% and the fed should reach 40%-60% based on the table.